Drop Forged Carbon Stainless Steel Hot Dipped Galvanized Wire Rope Cable Clip

Power fittings are metal accessories that connect and combine various devices in the power system and play a role in transferring mechanical load, electrical load and certain protection.
According to the function and structure, it can be divided into suspension clamp, tensioning clamp, UT clamp, connecting fittings, connecting fittings, protective fittings, equipment clamp, T clamp, bus fittings, drawing fittings and other categories; According to the use can be used for line hardware and substation hardware.

Product Details

According to the main performance and use of the hardware, the hardware can be roughly divided into the following categories

1), suspension hardware, also known as support hardware or suspension clamp. This kind of hardware is mainly used to hang the wire insulation substring (mostly used for linear poles) and hang the jumper on the insulator string.

2), anchoring fixtures, also known as fastening fixtures or wire clamp. This kind of hardware is mainly used to tighten the terminal of the wire, so that it is fixed on the wire insulator string, and is also used for the fixing of the lightning rod terminal and the anchoring of the cable. Anchor fixtures bear all the tension of wires and lightning arresters, and some anchor fixtures become electrical conductors

3), connecting hardware, also known as hanging parts. This kind of fittings is used for connecting insulator strings and fittings to fittings. It bears mechanical loads.
4), continuation of gold tools. This kind of hardware is specially used for connecting various bare wires and lightning arrester wires. The connection bears the same electrical load as the wire, and most of the connection fittings bear all the tension of the wire or lightning rod.

 

5), protective equipment. This kind of equipment is used to protect wire, insulator, etc., such as the pressure balancing ring for protecting insulator, the heavy hammer for preventing the pulling of insulator string, and the anti-vibration hammer and wire protection bar for preventing the vibration of wire

6), contact with hardware. This kind of hardware is used for hard bus, soft bus and electrical equipment to be connected to the wire terminal, the T connection of the wire and the parallel connection of the non-bearing wire, etc. These connections are electrical contacts. Therefore, high electrical conductivity and contact stability of contact fixtures are required.

7), fixed fixtures, also known as power plant fixtures or high current bus fixtures. This kind of fixture is used for fixing and connecting various hard or soft busbars and pillar insulators in power distribution devices. Most of the fixed fixture is not used as a conductor, but only plays the role of fixing, supporting and suspending. However, since these fittings are used for high current, all components should have no hysteresis loss.

The wire rope clamp (also known as the wire rope clamp) has the function of fixing or connecting the rope end, and it is often used together with the wire rope, which is suitable for heavy duty conditions such as cranes, mining transportation, ships and construction.

As a common connection tool in modern construction and machinery industry, the use of steel cable clamp is very important. It can be used to lock wire ropes of different diameters, and can also be used to connect wire ropes and other metal parts, with strong, durable, simple structure and other advantages.

Wire rope clamp is a common lifting tool, which can fix the wire rope on the bracket, and is widely used in industrial sites, ships, docks and other occasions.
As a professional manufacturer, our products are various, such as U.S. Type Malleable Wire Rope Clip; DIN741 Malleable Wire Rope Clip; DIN1142 Wire Rope Clip; Wire Rope Clip Type A; Wire Rope Clip Type B; U.S. Type Drop Forged Wire Rope Clip; U.S. Type Drop Forged Fist Grip Clip etc.

Technical parameters

TYPE	Steel Wire Dia,mm		Dimensions,mm				Weight, kg
	Type	Outer Dia.	M	R	C	H
JK-1(10)	GJ-25-35	6.6-8.0	10	5	21	53	0.151
JK-2(12)	GJ-50-70	9.0-11.5	12	7	26	60	0.222
JK-3(15)	GJ-100-120	12.5-14.0	14	8	31	74	0.356

Steel Wire Ropes Clip
Size (mm)	Diemensions (mm)					Weight
	A	B	C	D	E	100pcs(IBS)
3	21	10	10	4	9	3.09
5	23	10	11	5	11	3.3
6.5	26	11	12	5	13	4.63
8	30	15	14	6	16	9.04
10	34	17	18	8	19	15
11	36	18	19	8	20	15.87
13	40	21	23	10	24	28.7
14	44	22	23	10	25	29.76
16	50	26	26	12	29	46.3
19	54	30	29	12	32	61.7
22	61	34	33	14	37	88.2
26	65	37	35	14	41	97
30	74	43	37	16	48	145.5
34	80	50	42	16	52	187.4
40	88	55	45	16	58	229.3

DIN741 wire rope clip

Product	Wire rope clip
Standard	DIN741
Size	3mm ~ 40mm
Material	Carbon steel, malleable iron, 304/316 stainless steel
Surface Treatment	Hot dipped galvanized, electro galvanized, color painted, high polished, mirror polished
Heat treated	Drop forged, tempered and quenched
Feature	The same strength as wire rope, safety in use
	High load lifting security
	Long life service
Usage	Fixing the wire rope
Package	Gunny bag or poly woven bag or carton and pallet / by customer requirements
Delivery Time	10-35 days

Drawing and Data

Item No.	Wire Rope Size		Weight (kg)	A (mm)	B (mm)	C (mm)	D (mm)	E (mm)	F (mm)	G (mm)
	mm	in
DIN741-3	3	1/8	0.014	9	10	12	4	10	21	16
DIN741-5	5	3/16	0.015	11	11	13	5	10	23	19
DIN741-6.5	6.5	1/4	0.021	13	12	15	5	11	26	23
DIN741-8	8	5/16	0.041	16	14	19	6	15	30	28
DIN741-10	10	3/8	0.068	19	18	22	8	17	34	34
DIN741-11	11	7/16	0.072	20	19	22	8	18	36	36
DIN741-13	13	1/2	0.13	24	23	30	10	21	42	45
DIN741-14	14	9/16	0.135	25	23	30	10	22	44	47
DIN741-16	16	5/8	0.21	29	26	33	12	26	50	51
DIN741-19	19	3/4	0.28	32	29	38	12	30	54	63
DIN741-22	22	7/8	0.4	37	33	44	14	34	61	71
DIN741-26	26	1	0.44	41	35	45	14	37	65	81
DIN741-30	30	1-1/8	0.66	48	37	50	16	43	74	94
DIN741-34	34	1-1/4	0.85	52	42	55	16	50	80	104
DIN741-40	40	1-1/2	1.04	58	45	60	16	55	88	124

 

First, Material selection and screening.

1. According to the functional requirements and use conditions of power fittings, select high-quality metal materials that meet the standards, such as carbon steel plate, stainless steel plate, copper plate, etc.

2. Strict screening and inspection of the selected metal raw materials to exclude unqualified materials and ensure reliable quality.
 

Second, processing and forming.

1. Develop the processing plan and process flow of the hardware, select the appropriate machine and equipment for cutting, stamping, bending and other processing operations, and accurately control the size, Angle, pressure and other parameters.

2. According to the requirements of different types of goldware products, the corresponding molding process is used, including rolling, casting, forging, welding, etc., to ensure that the product structure is tight and not easy to deformation.

Third, surface treatment.

1. Surface treatment of the formed fittings, including rust removal, grinding and other processes, to achieve the requirements of finish and anti-corrosion effect.

2. Select appropriate surface treatment methods, such as galvanizing, spraying, electrophoresis, etc., to enhance the corrosion resistance and beauty of the surface of the hardware.
 

Fourth. Assembly and inspection

1. According to the product design requirements and process flow, the assembly and combination of fittings are carried out, and the connection and functional performance of each part are strictly checked to ensure that the fittings have a reliable working state.

2. Inspect the finished products, including appearance inspection, pressure performance test, mechanical performance test, etc., to ensure that the products meet the requirements, and make the unqualified products be recycled, repaired or eliminated.

We have passed the above steps, the production of electric power fittings will be completed. In the above process, there is a certain dependence between the various steps, and each step has its own process details and operational points, which need to be carefully controlled and managed. Only in this way can we ensure the production of high-quality, high-performance power fittings products.

Hebei Leicheng Electric Power Technology Co., Ltd. is a professional engaged in power transformers, high and low voltage switchgear and related products R & D, production, sales and service of science and technology enterprises.

Since its establishment, the company has been committed to the road of professional development. With strong technical force, advanced equipment at home and abroad, innovative concept and rich manufacturing experience, has passed ISO9000 certification, the use of CAD, to provide customers with suitable regional characteristics of environmental protection, energy saving, low-carbon, high-quality products to meet the basic requirements of the market and different customers. Products are also exported to Central Asia, Africa, Southeast Asia, the Middle East, South America and other countries and regions.

At present, the company mainly produces high voltage/low voltage distribution cabinets, prefabricated substations, distribution transformers, high voltage/low voltage switches and other products.

Various power fittings and accessories, such as transformer support frame, cable hoop, bolt, wire clamp, cross arm and other products are numerous. 

Steel products, such as H-shaped steel, channel steel, steel pipe, Angle steel, hot dip galvanized iron wire, etc., are also our main products!

Welcome to shop! Contact me for more product information!

You can rest assured that the packaging of the product, as the last link we strictly control!
FAQ

Q: Are you a Manufacturer, factory or Trading company ?
A: Yes, We are engaging in the research and development, production and operation of transformer for over 10 years.

Q: What's your warranty terms?
A: We offer 12 months warranty time.

Q: Production Time?
A: In general, it take 4~6weeks and it depend on the different style.

Q: What's your payment terms?
A: Pay by T/T and  L/C is acceptable.

Q: How do you conduct quality control in your factory?
A: We implement 100% QC inspection to ensure every product is qualified. We have over 10 times QC inspections during the manufacturing process from raw material to the final products.Each of our unit has  3C  certificate. If you need any other Certificate, we can help you to apply it.

Q: Do you have the products in stock?
A: Normally no. All our products produce depending to your order quantity.

 Q: What should provide to make custom transformer ?
A: Technical drawing and technical specification document are the best, or you can tell us some details technical specification date as below "Quotation and Ordering Required Information".

Q: Could I have your catalog and price list for trial order in MOQ quantity?
A: All of our products are showing on Made-in-China or official website, you are always welcome to ask us to get more information directly.

Related Products
Our plants produce all types of Transformers and Transformer Substation, including Dry Type Transformer, Oil Immersed Transformer, Pole Mounted Distribution Transformer, Power Transformer, Pad Mounted Transformer, Box Type Transformer Substations, Compact Substation, Power Distribution Cabinet, Switchgear Cabinet, Power Breaker etc...
Our plants produce all types of Electric power fittings and Power line fittings, including Tension Clamp, Anchor Clamp, Wedge Clamp, Parallel Groove Clamp, Splicing Sleeves, Link Fittings, Splicing Fittings, Partial Tension Fittings, Protective Fittings, Bus-Bar Fittings, etc...
Our plants produce all types of Fastener, including Bolt, Nut, Screw, Washer, Anchor, Rivet, etc...
Our plants produce all types of Steel, including Stainless Steel Steel, Carbon Steel, Galvanized Steel, Angle steel, Cross Arm, H beam, Channel Steel, Color Roofing Sheet,  etc...
Related products can be found on our home page, or contact me directly, let me help you!
 

Welcome to our homepage to see more content!